9
2,Please check whether the sensor strap is tied tightly in the process of installing the
sensor.
3,If there is a sensor damaged or lost, it will not affect the work of other sensors. You
need to replace with new sensor. The sensor ID programming and installation can be
referred to its steps.
Installing steps:
1.
Pull the tire and tie the sensor strap to the hub
；
2.
Inflate the tire to the standard pressure recommended by the vehicle manufacturer
or required by the customer;
3.
After the sensor be installed, the sensor can immediately sense the pressure and
temperature inside the tire and transmit the collected data to the monitor . The monitor
will display the data on the screen within six minutes of the sensor transmitter being
installed.
Note: 1. Please set the standards pressure of each tire on monitor
before install the transmitter. The standard pressure for each tire
location has been preset to100PSI in factory.
2. If one of your transmitters is broken or lost, user only needs
to replace this one.
Sensor parameter
Mid-frequency: 434.13 MHz
Transmitting Power: 0 dBm
Input Voltage: 3.6V (Battery)
Static Current: < 0.7uA
Operating temperature range: -40
℃
~125
℃
