SBOX-7210 - User Guide, Rev. 1.0
// 31
5.1.4.
Installing An M.2 Key M SSD
To install an M.2 Key M SSD please proceed according to the steps described:
1.
Open the device as described in the subsection 5.1 "Opening and Closing the Chassis" (step 1 - 8).
2.
Locate the M.2 Key M socket (Figure 4, pos. 5) and the corresponding fixing bolt (Figure 4, pos. 9, 10 or 11
depending on M.2 SSD type).
3.
Align the notch on the M.2 SSD with the notch in the M.2 socket. Insert the M.2 SSD into the corresponding socket
and rotate it down with the fixing hole of the M.2 SSD over the fixing bolt.
4.
Press the M.2 SSD down on the side with the fixing hole and secure it with the available fastening screw.
5.
In order to close the device, proceed step 9 - 12 described in the subsection 5.1 "Opening and Closing the Chassis".
A screwable fixing bolt is provided onboard. Screw the fixing bolt to the corresponding
position depending on the type of M.2 SSD.
Due to mainboard layout constraints, only the following combinations are supported in
case of both mPCIe card and M.2 SSD required:
Half-sized mPCIe card + Type 2242 M.2 SSD
Half-sized mPCIe card + Type 2260 M.2 SSD
Full-sized mPCIe card + Type 2242 M.2 SSD
