QSEVEN-Q7ALx2 - Preliminary User Guide, Rev. 0.7
// 46
The following table shows the Main setup menu sub-screens and functions and describes the content.
The BIOS features in this user guide are open to change and may not be the latest version.
The latest version may have differences to the options and features described in Table 18.
Table 18: Main Setup Menu Sub-screens and Functions Example
Sub-Screen
Description
BIOS
Information>
Read only field
BIOS vendor, Core version, Compliancy, Project version, Build date and time, and Access level
On-board LAN
Information>
Read only field
LAN MAC Address
Additional information for MAC Address
The MAC address entry is the value used by the Ethernet controller and may contain the entry
‘Inactive’ - Ethernet chip is inactive. To activate the Ethernet chip set the following:
Advanced > Network Stack Configuration > Network Stack > Enable
88:88:88:88:87:88 is a special pattern that will be filled in by the Ethernet firmware if there is
no valid entry in the firmware block of the BIOS SPI (i.e. the MAC address has been overwritten
during the last attempt to flash the system).
CPU
Information>
Read only field
Processor Type, CPU signature, Microcode patch, CPU Speed, processor Core, intel VT-x
technology
Memory
Information>
Read only field
Total memory and Memory speed
Platform
Firmware
Information>
Read only field
Module Information
BXT SOC, MRC Version, PUNIT FW, PMC FW, TXE FW, GOP, and CPLD rev
System Date>
Displays the system date [Week day mm/dd/yyyy]
System Time>
Displays the system time [hh:mm:ss]
