3.5"-eIO-GPA - User Guide, Rev. 1.0
// 16
3.2.
Component Main Data
The table below summarizes the features of the 3.5"-eIO-GPA.
Table 1: Component Main Data
Video
Display Interface
2x DP (on rear)
1x eDP (optional, trade off with 1x DP)
Network Connection
Ethernet
2x 2.5 GbE LAN (RJ45 on rear, Intel® I225-LM/IT)
Peripheral Connection
Serial Port
1x UART (by header)
Other I/Os
1x I
2
C (by header)
1x SMBus (by header)
1x GSPI (by header)
Storage & Expansion
Memory
1 MByte nvSRAM (optional, trade off with GSPI)
32 KByte EEPROM (optional, trade off with I
2
C)
mPCIe
1x mPCIe (optional, Full Size, w/ PCIe x1 & USB 2.0, trade off with 2nd 2.5 GbE)
SIM Card Holder
1x SIM Card Holder (optional, Nano size, Push-Push type, connected to mPCIe)
Power
Input Voltage
DC 11 V ~ 32 V (w/ reserve polarity protection, DC input from terminal block)
DC 12 V / 5 VSB / 3.3 VSB (DC input from Board-to-board connector)
Connector
1x3-pin 3.5 mm pitch terminal block
Board-to-board Connector
Mechanical
Dimension (L x W)
146 mm x 59 mm / 5.75" x 2.32"
Connection
100-pin extended board-to-board connector
Application
Supported
Baseboard
Kontron 3.5’’-SBC with 100-pin extended board-to-board connector
