27
GB
Sleep Setting
This function allows you to program the unit to turn to standby mode by itself after a set
period of time.
1. To activate the sleep function, press the SLEEP/SNOOZE button repeatedly. The time
will change in the below sequence on every press:
15
30
45
60
75
90
OFF
2. When your desired sleep time appears in the display, stop pressing the button and the
sleep function will be activated in two seconds. “ ” will show on the display. Also the
time remaining until switch off is displayed next to the symbol in the display.
3. When the sleep timer counts down to zero, the unit will turn to standby mode. To turn
the sleep function off while the sleep timer is still counting down, press the SLEEP/
SNOOZE button repeatedly to select “SLEEP OFF”. “ ” will disappear from the display.
4. Press the SLEEP/SNOOZE button once to show the sleep timer status on the display
when it is turned on.
Alternatively,
1. Press the MENU button on the unit or the remote control to display the function main
menu. Turn the SCROLL dial on the unit or press the
buttons on the remote control to
select Main menu, and then press the SELECT button on the unit or the remote control.
2. Turn the SCROLL dial on the unit or press the
buttons on the remote control to select
Sleep mode, and then press the SELECT button on the unit or the remote control.
3. Turn the SCROLL dial on the unit or press the
buttons on the remote control to select
sleep timer. Press the SELECT button on the unit or the remote control to confirm.
SVDiB_W12E_IB_Final120530.indb 27
31/05/2012 10:17 AM
