10
GB
Removing the Insulating Strip from the Remote Control
Remove the insulating mylar strip from the battery
if the battery is being used for the first time. It
is located at the bottom backside of the remote
control.
Battery Replacement for the Remote Control
The remote control requires a CR2032, 3V Lithium battery.
1. Using a paperclip, carefully pry open the battery
release tab in the direction.
2. Pull out the battery holder and remove the old
battery.
3. Replace with a new battery.
4. Insert the battery holder back into the remote
control.
SVDiB_W12E_IB_Final120530.indb 10
31/05/2012 10:16 AM