Sandstrom S66IDAB10E, Instruction Manual

Page: 20 / 104

FM Display Modes
Every time you press the INFO button, the display will cycle through the following display
modes: Programme Type , Signal Strength , Time/Date , Channel Frequency , Audio Mode ,
Radio Text
.
Programme Type
Signal Strength
Time/Date
Channel Frequency
Audio Mode
Radio Text
Programme Type
This describes the “
Style
” or “
genre
” of music that is
being broadcast e.g. “ Rock ” or “ Classical ”.
Signal Strength
The slide bar indicates how strong the signal is, the
stronger the signal, the longer the bar will be.
Time/Date
The broadcaster (Radio station) provides clock and
date information automatically so there’s no need
to manually set this information. In the unlikely
event that the broadcaster does not transmit any
clock information; the display will show < Time/
Date
>.
Channel Frequency
This shows the frequency of the current station e.g.
89.80MHz.
Audio Mode
When in FM mode, the display will show if the
station being received is in mono or stereo. The
receiver will automatically switch between Stereo
and Mono mode. You can however override this
function, so that you can manually switch between
Stereo
and
Mono
mode, which is helpful if you’re
listening to a poor FM signal.
Radio Text
As with DAB, the broadcaster can include a
scrolling text that displays information about the
current program. If Radio text information is not
available, then the display with show < Radio
Text
>.
To switch between mono and stereo, press the
ENTER
button once, you will see on the display “
Auto
” or “
Mono
”.
To toggle between each mode just press the ENTER button
again.
20
GB
S66IDAB10E_IB_5L_110715.indb 20 15/07/2011 5:01 PM