Sandstrom S66IDAB10E, Instruction Manual

Page: 13 / 104

GB
Basic Operation
Powering ON/OFF
When you first connect the unit to the mains socket. The unit will be in
Standby
mode.
• Press the STANDBY button to switch the unit on.
• Press the STANDBY button in Power On mode to switch the unit back to Standby mode.
• Disconnect the power cable of the mains adapter from the mains socket if you want to
switch the unit off completely.
Selecting Modes
Press the MODE button repeatedly to switch between modes ( DAB , FM, iPod or AUX ).
Adjusting Volume
Press the
Vol+
or
Vol–
button to increase / decrease the volume.
Setting the Alarms
1. Press the ALARM1 button on the unit or on the remote control to set the ALARM 1.
2. The alarm
ON
or
OFF
indicator will flash in the display. Press the buttons to set
alarm
ON
or
OFF
, then press the
ENTER
button to confirm.
3. The hour digits will then flash. Press the buttons to adjust the hour digits, then
press the
ENTER
button to confirm.
4. The minute digits will then flash. Press the buttons to adjust the minute digits, then
press the
ENTER
button to confirm.
5. The alarm type will then flash. Press the buttons to select the alarm type. ( BEEP
Tone 1 , BEEP Tone 2 , DAB , FM or iPod ). Press the ENTER button to confirm.
6. To set ALARM 2, press the ALARM2 button on the unit or on the remote control. Then
repeat the above steps 2-5.
7. When alarms are set, the “ ” or “ ” indicator will show in the display in
Standby
mode
(depending on what you have set).
If the
RADIO
is selected as the
Alarm
mode, make sure the volume is set to a
level that can wake you up.
13
S66IDAB10E_IB_5L_110715.indb 13 15/07/2011 5:01 PM