Sandstrom S60GW12, Instruction Manual

Page: 7 / 20

INSTALLATION
7
Cleaning Before Use
Wipe the inside of the unit with a weak solution of bicarbonate soda. Then rinse with warm water using
a ‘wrung-out’ sponge or cloth. Wipe completely dry before replacing the shelves, drawers and salad
bins. Clean the exterior of the unit with a damp cloth.
If you require more information refer to the Cleaning section.
Levelling the Unit
To ensure the unit is level, adjust the two levelling feet at the
front of the unit.
If the unit is not level, the doors and magnetic seal will not align
properly.
In order to make the most of the volume of the fresh food storage compartment and frozen-food
storage compartment, the user can remove one or more shelves, or drawers, out of the appliance,
according to daily use.
• Before Plugging in YOU MUST
Check that you have a socket which is compatible with the plug supplied with the unit.
• Before Turning On!
Do not turn on until six hours after moving the unit. The coolant fluid needs time to settle.
Before Using Your Unit
Before placing any food in your unit, turn it on and wait for 24 hours, to make sure it is working
properly and to allow it time to fall to the correct temperature. Your unit should not be overfilled.
Interior Accessories
Various glass or plastic storage shelves are included with your appliance – different models have
different combinations.
You should always slide one of the full size glass storage shelves into the lowest set of guides, above
the fruit and vegetable containers, and keep it in this position. To do this, pull the storage shelf forward
until it can be swivelled upwards or downwards and remove.
Please do the same in reverse to insert the shelf at a different height.