Sandstrom S60GW12, Instruction Manual

Page: 6 / 20

INSTALLATION
6
When replacing the top hinge cover, use the available fixing screw holes
(these may not be in the same locations as the right hand side).
1. Remove the top hinge cover, carefully disconnecting the wiring harness, then remove the top
hinge (1). Carefully remove the fridge door and place it on a padded surface to avoid scratching or
damage.
2. Remove the middle hinge (2). Carefully remove the freezer door.
3. Remove the bracket cover (4), then remove the bottom hinge (3).
4. Reverse the position of the bushing cover of the fridge door (6):
From the top of the fridge door, unscrew and remove the harness cover, then remove the left door
harness. Secure the right hand harness within the door and assemble the harness cover.
5. Reverse the position of the bushing cover of the freezer door (8):
6. Reverse the position of the door switch by swapping it with the blanking plate (5):
Unscrew the door switch cam and move it to the left hand side. Assemble the bracket on the left.
7. Reverse the position of the fridge door stopper (7) and freezer door stopper (9).
8. Attach the freezer door to the unit.
9. Fix the middle hinge (2) on the new side. Attach the fridge door to the unit. Do not drop the door.
10. Fix the top hinge to the door and connect the wires for the door switch (1) and wire harness.
11. Connect the door switch wire housing. Assemble the door switch on the new side.
12. Fix the bracket cover (4) to the unit.
1
2
3
4
5
6
8
7
9
1 Top hinge cover,
screws & top hinge
2 Middle hinge, screws
& plug
3 Lower hinge & screws
4 Bracket cover
5 Door switch cam &
screw
6 Fridge door bushing
cover
7 Fridge Door stopper
8 Freezer door bushing
cover
9 Freezer door stopper
* All images are for indication only; please refer to your individual unit for actual item.