Sandstrom S5GONGW13, Instruction Manual

Page: 11 / 24

11
Cleaning and Maintenance
• To avoid shock hazard, always disconnect the hob from the electrical supply.
• Steam Cleaners must not be used to clean this product.
Cooking Part Cleaning Method Important
Trivets/pan supports,
burner caps and
enamel surfaces • Hot soapy water and nylon scourer
• Non-abrasive cream cleaners • Always allow hob parts to cool
completely before cleaning them
• Always apply minimal pressure
with cleaners
• Remove spills as soon as the hob
is cool to avoid the spills becoming
burnt on
Burner parts • Hot soapy water
• To clear the holes use a stiff nylon
brush
• Non-abrasive cream cleaners
• Ensure burner parts are dry before
refitting
• Reassemble the burner parts
correctly
Controls • Hot soapy water and a soft cloth • Care must be taken if removing the
controls from the shafts
• If cleaning the controls whilst they
are attached to the shaft, ensure
liquid does not enter the appliance
Hob surfaces • Soak stains under a hot soapy cloth,
rinse and dry thoroughly
• Non-abrasive hob surface cleaners.
Regular use of a polish designed for
use with glass hobs will reduce
fingerprints and other marks
• Never use harsh/abrasive cleaning
agents as they will damage the finish
• Chlorine or chlorine compounds in
some cleaners are corrosive to hob
surface and may damage the
appearance of your hob. Check the
label on the cleaner before using
Electrodes • Toothbrush • A dirty or wet electrode will prevent
the burner lighting efficiently. Ensure
the appliance has been disconnected
from the electrical supply before
cleaning or drying
Regular Maintenance
Daily • Clean gas hob as per the instructions
Monthly • Remove all burner parts, and clean using a non-abrasive detergent.
Rinse in cold water, dry thoroughly, and replace
• Clean the ignitor and probe carefully, using a toothbrush
Yearly • Contact your local authorized gas Service Agent to perform a thorough check
on all gas components on the gas hob