Sandstrom S32LDIB10, Instruction Manual

Page: 21 / 48

GB-19
Pr
epar
ation
Connec
tions
Initial
Setup
U
sing
the
Fea
tur
es
U
sing
the
Fea
tur
es
via
USB
por
t
H
in
ts
and
Tips
, Specifica
tion
and
Saf
et
y
W
ar
nings
Video Size (Aspect Ratio)
Allows you to watch the screen in various picture formats: Auto / 16:9 / 4:3 / Zoom / Expand / Smart Zoom / Dot to Dot.
Press the
Zoom
button repeatedly to select the desired format.
Input Signal 4:3 Input Signal 16:9
Auto This selection will display
the picture according to
the aspect ratio of the
input source. This selection will display
the picture according to
the aspect ratio of the
input source.
16:9 This selection will allow
you to adjust the picture
horizontally, in linear
proportion, to fill the
entire screen. This selection will allow
you to view a picture
with an original 16:9
aspect ratio.
4:3 This selection will allow
you to view a picture
with an original 4:3
aspect ratio, black bars
will appear on both
the left and right of the
screen. This selection will allow
you to adjust the picture
horizontally, in linear
proportion, black bars
will appear on both
the left and right of the
screen.
Zoom
This selection will
allow you to zoom in
the picture without
any alteration, while
filling the entire screen.
However, the top and
bottom of the picture
will be cropped. This selection will allow
you to zoom in the
picture without any
alteration, while the 4
sides of the picture will
be cropped.
Expand This selection will allow
you to zoom in the
picture without any
alternation, while filling
the entire screen with
subtitles shown at the
bottom of the screen. This selection will
allow you to zoom in
the picture without
any alternation, while
showing subtitles at the
bottom of the screen.
Smart Zoom This selection is similar
to 16:9 mode, but the
picture slightly stretches
vertically and clips off a
little from the top and
bottom. This selection is similar
to 16:9 mode, but the
picture slightly stretches
vertically and clips off a
little from the top and
bottom.
Dot to Dot
(VGA,
Component
& HDMI
modes only)
This selection will detect
the resolution of the
HDMI signal and display
an image with the same
number of pixels. This selection will detect
the resolution of the
HDMI signal and display
an image with the same
number of pixels.