8
GB
Battery Replacement for the Remote Control
The remote control requires a CR2025, 3V Lithium battery.
1. Slide and hold the battery release tab in the direction
of the arrow.
2. Pull out the battery holder and remove the old battery.
3. Replace with a new battery (CR2025).
4. Insert the battery holder back into the remote control.
Handling the Battery
•
Improper or incorrect use of batteries may cause corrosion or battery leakage, which
could cause fire, personal injury or damage to property.
•
Install the battery correctly in the battery compartment. Normally the battery’s positive
polarity (+) will face up.
•
When the battery is exhausted, the remote control will not function.
•
Only use the battery type indicated in this manual.
•
Do not dispose of the used battery as domestic waste. Dispose of it in accordance with
local regulations.
•
Small button cell batteries such as the one used in the remote control are easily
swallowed by young children and this is dangerous. Keep loose button cells away from
young children and make sure that the battery is secure in the remote control. Seek
medical advice if you believe a battery cell has been swallowed.
+
+
Handling the Remote Control
•
If you are finding it difficult to remove the battery, use a paperclip to slide the battery tab.
•
Do not drop the remote control.
•
Do not allow anything to impact the remote control.
•
Do not spill water or liquid on the remote control.
•
Do not place the remote control on a wet object.
•
Do not place the remote control under direct sunlight or near sources of excessive heat.
•
Remove the battery from the remote control when not in use for a long period of time,
as corrosion or battery leakage may occur and result in physical injury, and/or property
damage, and/or fire.
S190iP13E_IB_121010_Michelle.indb 8
10/10/2012 11:37 AM
