10
GB
Connecting to an Auxiliary Device
1. Before connecting to the mains socket, use a
3.5mm AUX IN
cable (not included) to
connect your audio device through the
AUX IN
socket at the rear of the unit.
2. Connect to the mains socket.
3. Press the
AUX
button to select
AUX
mode.
4. Operate your audio device as normal, however, you can use the unit to control
the volume.
iPhone / iPod Operation
Inserting the iPhone / iPod
1. Carefully slot your iPhone / iPod onto the iPod / iPhone dock.
2. If the iPhone / iPod is connected, the unit will take around 10 seconds to identify the
iPhone / iPod.
3. Once the iPhone / iPod is connected the unit will begin to play the last played track
from the iPhone / iPod.
Charging your iPhone / iPod
1. Your iPhone / iPod has an internal non-removable battery, the battery may need to be
charged if it has not been used for a while.
2. You can automatically charge the iPhone / iPod through the unit when it is docked.
•
To control menu operation of iPhone series, iPod touch series and iPod nano 6
th
generation, you need
to enter the music menu on your iPhone / iPod first.
•
This manual provides the basic instructions of menu navigation on iPhone / iPod. For advance
operations, please refer to instruction accompanied with your iPhone / iPod.
•
Your unit is compatible with iPod touch 1st, 2nd, 3rd and 4th generations (8GB and above). iPod
classic (8GB and above). iPod nano 3rd, 4th, 5th and 6th generations (8GB and above). iPhone, iPhone
3G, 3GS, 4 and 4S (8GB and above).
•
The unit cannot show any music information of your iPhone / iPod. Please view the music information
from your iPhone / iPod display.
•
To avoid damaging your iPhone / iPod or the unit, please take care when inserting and removing your
iPhone / iPod from the dock.
•
iPod models that cannot be docked
•
MP3 players
•
CD & Tape walkmans
•
PCs and laptops
Headphones socket
3.5mm AUX IN Cable
(Not included)
To the AUX
IN Socket
S190iP13E_IB_121010_Michelle.indb 10
10/10/2012 11:37 AM