GB
19
Be sure to unplug the appliance before cleaning. Remove the jug from the warming plate. Place the filter
and funnel in the funnel support and close the funnel door.
1. Use the grinding compartment key to unlock the
grinding compartment.
2. Open the grinding compartment cover.
3. Use the brush to clean the grinding compartment.
4. Close the grinding compartment cover, then
use the grinding compartment key to lock the
grinding compartment .
Cleaning the Grinding Compartment
When grinding coffee beans, coffee powder can clog the grinding mechanism. The grinding
compartment must be cleaned when the
Grinding Compartment Cleaning
indicator
is shown on the display. The grinding compartment should be cleaned regularly to prevent
the grinding mechanism from being clogged.
Descaling the Coffee Maker
Depending on the hardness of the water in your area, limescale may be deposited inside
the coffee maker. The coffee maker may need descaling from time to time.
1. Open the water tank cover and fill with descaling solution (following the
manufacturers instructions) and water to the maximum level “MAX 10”.
2. Place the jug on the warming plate.
3. Make sure NO coffee is in the coffee maker. Press the
Start/Stop
button, let the coffee
maker run until 1/3 of the descaling solution is in the jug.
4. Press the
Start/Stop
button to stop the unit. Let the descaling solution work for
approximately 30 minutes.
5. Press the
Start/Stop
button again and let the unit run until the remaining descaling
solution is in the jug.
6. Pour fresh water into the water tank to the maximum level “MAX 10” (do not place
any coffee in the appliance). Repeat steps 3-6 in the section “
Operation - Making
Coffee with Ground Coffee
”. Repeat this process 3-4 times (or refer to the descaler
manufacturers instruction) with fresh water each time to ensure that the descaling
liquid has been thoroughly rinsed through. Clean the filter, funnel, jug and jug lip with
hot soapy water.
S10GC13E_IB_7L_130228_Annie.indb 19
13年2月28日 上午10:46
