Room
M
onit
or
A
nsw
er
M
achine
Te
xt
M
essag
ing
U
sing
Additional
Handsets
Help
GB-47
USING ADDITIONAL HANDSETS
You can use up to five additional handsets with your answer machine to extend your phone system
without needing to install extension sockets for each new phone.
Your unit handset can also be registered to up to 3 other bases. You can then select the base you would
prefer to use.
If you have purchased a unit multiple pack any additional handsets come pre-registered to the base.
If you have purchased an additional handset separately you must register it to your unit base before it
can be used.
Registering an additional handset
At the base:
1. Press and hold the button for 2 seconds until the base Beep. The base will remain in registration
mode for 90 seconds.
At the handset:
1. If the handset is new and the display shows
Please Register
. Press the
Menu
button. Scroll the but-
ton to
Registration
. Press the
Select
button. Or
If the handset has already been registered to another base the standby display is shown. Press the
Menu
button, scroll the or button to
Registration
and press the
Select
button.
2.
Register Handset
is highlighted. Press the
Select
button.
3.
Bases
are displayed. If necessary, scroll the or to a new base you wish to register your unit hand-
set to and press the
Select
button.
4. Enter the system PIN and press the
OK
button. (Default setting = 0000)
5. The display shows
Searching Base X
(where X is the chosen base number) then
Handset Registered
.
The handset is automatically assigned the next available handset number�
If registration is not successful first time, please repeat the process again in case the base registration
period ran out of time�
If there are already 5 handsets registered to the base, the registration will fail� You must de-register an
-
other handset before you can register the new one�
Select a base
If your unit handset is registered to more than one base, you can select which base to use.
1. Press the
Menu
button, scroll the or button to
Registration
and press the
Select
button.
2. Scroll the button to
Select Base
and press the
Select
button.
3. All base numbers are displayed. (In use) is added to bases where the handset was previously registered
to. Scroll the or button to the base you want and press the
Select
button.
4. Display shows
Searching Base���
. then the standby display for that base.
De-register a handset
Use one handset to de-register another. You cannot de-register the handset you are using.
1. Press the
Menu
button, scroll the or button to
Registration
and press the
Select
button.
2. Scroll the button to
De-register
and press the
Select
button.
3. Enter the system PIN and press the
OK
button. (Default setting = 0000)
4. Scroll the or button to the handset you want to de-register and press the
Select
button.
5. Press the
Yes
button to confirm or
No
button to cancel.
6. Press the
Back
button to return to the previous menu level or the button to return to standby.
S100DT10_100722.indd 47
7/22/10 10:36 AM
