GB-15
Settings
Basic Operation
Preparations
Introduction and Pr
od
uc
t O
ve
rv
ie
w
Troubleshooting and Specification
Safety Warnings
Safety Warnings
When using electrical appliances, basic
precautions should always be followed,
including the following:
• Read all the instructions and retain this
instruction manual.
• Ensure that all electrical connections
(including the mains adaptor and
power cable) are properly made and
in accordance with the manufacturer’s
instructions. Switch off and withdraw
the mains adaptor before making or
changing connections.
• Consult your dealer if you are ever in
doubt about the installation, operation
or safety of your photo frame.
• Do not allow the photo frame to be
exposed to dripping or splashing.
• Never store in hot or very cold areas.
Recommended operating temperature
is 0~40°C.
• Do not use the photo frame in areas
with high moisture (e.g. bathroom) or
dusty areas.
• Do not place hot objects or naked
flame sources such as lighted candles
or night lights on or close to the photo
frame. High temperatures can melt
plastic and lead to fires.
• Do not obstruct the ventilation
openings of the photo frame with
items such as newspapers, tablecloths,
curtains, etc. Overheating will cause
damage and shorten the life of the
photo frame.
• Do not handle the power cable with
wet hands.
• Be careful with the LCD panels on the
photo frame.
• Only use attachments/accessories
specified by the manufacturer.
• When the photo frame is not in use or
unattended for a long period of time,
disconnect it from the mains socket.
• Do not remove any fixed cover as this
may expose dangerous voltages.
• Do not continue to operate the photo
frame if you are in any doubt about it
working normally, or if it is damaged
in any way - switch off, withdraw the
mains adaptor and consult your dealer.
• Never let anyone especially children
push anything into holes, slots or any
other opening on the case - this could
result in a fatal electrical shock.
• Route the power cable so that it is not
likely to be walked on, crushed, chafed,
or subjected to excessive wear, tear
or heat.
Note about LCD screen
The LCD screen is manufactured using
high-precision technology. However,
some tiny black points and/or bright
points (red, blue or green in colour) may
constantly appear on the LCD screen.
These points are generated in the
manufacturing process and are normal.
