GB-11
Settings
Basic Operation
Preparations
Introduction and Product Overview
Troubleshooting and Specification
Safety Warnings
Using the Tool Bar
You also can use the OSD menu to view the photos one by one manually.
1. Press the MENU button during viewing a photo or slideshow. The OSD menu
appears on the screen and the slideshow will pause.
2. Press the or button to navigate between the icons on the OSD menu.
• To start or resume a slideshow from the current photo, highlight on the screen
and press the button, and then the icon will change to on the screen.
• To zoom in on a photo, highlight
on the screen and press the button
repeatedly to magnify a photo.
• To rotate a photo clockwise, highlight on the screen and press the button
repeatedly.
• To rotate a photo counterclockwise, highlight on the screen and press the
button repeatedly.
• To set a photo to display on full screen or standard screen if its resolution is
higher than the resolution of the screen, highlight on the screen and press the
button.
• To change the slideshow into 4 split screen, highlight
on the screen and press
the button.
• To delete a photo, highlight
on the screen and press the button.
• To exit and close the tool bar, highlight on the screen and press the button.
