background image

Manufacturer:

Warren Rupp, Inc.

A Unit of IDEX Corportion

800 North Main Street

P.O. Box 1568

Mansfield, OH 44902 USA

EC / EU Declaration of Conformity

The objective of the declaration described is in conformity with the relevant Union harmonisation

legislation:  Directive 94/9/EC (until April 19, 2016) and Directive 2014/34/EU (from April 20, 2016).

The harmonised standards have been compared to the applicable standards 

used for certification purposes and no changes in the state of the art technical 

knowledge apply to the listed equipment.

AODD Pumps and Surge Suppressors

Technical File No.:  203104000-1410/MER

AODD (Air-Operated Double Diaphragm) Pumps

EC Type Examination Certificate No. Pumps: KEMA 09ATEX0071 X
DEKRA Certification B.V. (0344)

Meander 1051

6825 MJ Arnhem

The Netherlands

Applicable Standard:

EN13463-1: 2001

EN13463-5: 2003

EN60079-25: 2004

Harmonised Standard:

EN13463-1: 2009

EN13463-5: 2011

EN60079-25:2010

David Roseberry, Director of Engineering

DATE/APPROVAL/TITLE:

18 March 2016

Hazardous Locations Applied:

I M1 c 

II 2 G Ex ia c IIC T5

II 2 D Ex c iaD 20 IP67 T100°C

II 2 G Eex m c II T5

II 2 D c IP65 T100°C

II 1 G c T5

II 1 D c T100°C

II 2 G c T5

II 2 D c T100°C

II 2 G c IIB T5

UNIVERSAL ALL SP

Summary of Contents for Signature Series


















Reviews: