S&P CAIB - BC, Instruction Manual

Page: 25 / 56

Programming
Main screen:
Date:yy:mm:dd Time
Setpoint
Temperature measured
temperature by sensor
(Sp) (Act)
A
DJUSTING THE SETPOINT FOR TEMPERATURE REGULATION
From the main screen:
- press keys
q
,
u
then
u
- then press OK
1/ If access is authorized, the following screen appears
- press
OK
- then enter changes using keys
p
,
u
,
q
and
t
- confirm by pressing OK
- To exit configuration mode: press keys
t
,
t
then
p
2/ If access is not authorized, the following screen appears
- now enter 3333
using keys
p
,
u
,
q
and
t
- confirm by pressing
OK
- wait a few seconds until the screen showing the blow temperature appears
- then enter changes using keys
p
,
u
,
q
and
t
- confirm by pressing OK
- To exit configuration mode: press keys
t
,
t
then
p
u
current/Setpoint
p
Input/Output
Time setting
Setting
Ext Temp: NaN °C
Output temp.
Act: 18.3°C Setp->
SetP: 23.0°C
u
Output temp.
SetP: 23.0°C
q
Reg. new air intake
06:11:09 16:09
system: active
Sp: 23.0 Act:23.4°C
q
Log on
Password: ____
Actual level:none
Log on
Password: 3333
Actual level:active
Output temp.
SetP:
2
3.0°C
q
Output temp.
SetP: 15.0°C
q
Output temp.
SetP:
23.0°C
q
Output temp.
SetP: 15.0°C
q
Reg. new air intake
06:11:09 16:09
system: active
Sp:
23.0
Act:
23.4°C q