11
10
.-
This symbol means “Do not cover” this appliance with objects
that prevent the air circulating freely. Obstructing the airflow increases
the risk of overheating.
.- If the flexible power cable is damaged, it should only be replaced in
one of our Repair Workshops or by qualified staff in order to avoid a
dangerous situation.
.- Double insulated appliance
, therefore does not require
grounding.
.- Do not place the convector next to a wall made of combustible
materials (wood, plastic, etc.).
.- Inflammable objects must not be left within 1 m of the hot air circuit
(curtains, etc.).
.- Do not use the appliance in rooms whose area is less than 4m2.
.- Do not place the device where are air drafts, because can disrupt its
proper functioning.
.- This appliance can never be used directly on the floor, always supplied
feed
.- Always ensure that the air inlet and outlet grilles are clean.
.-
This appliance can be used by children aged from 8 years and above
and persons with reduced physical, sensory or mental capabilities or lack
of experience and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe way and understand
the hazards involved.
.-
Children should not play with the product.
11
.-
Children of less than 3 years should be kept away unless continuously
supervised.
.-
Children aged from 3 years and less than 8 years shall only switch
on/off the
appliance provided that it has been placed or installed in its
intended normal
operating position and they have been given
supervision or instruction
concerning use of the appliance in a safe way
and understand the hazards
involved.
.-
Children aged from 3 years and less than 8 years shall not plug in,
regulate and
clean the appliance or perform user maintenance.
CAUTION: Some parts of this product may be become hot and cause
burns.
Particular attention should be when children and vulnerable people are
present.
.- Cleaning and user maintenance must not be carried out by children
unless they are supervised.
.- This appliance must not be used connected to a programmer, timer or
another device that controls heater connection automatically.
.- Only for internal use
DESCRIPTION OF THE DEVICE
(Fig. 1)
a.- Hot air outlet for convection
b.- Support feet.
c.- Air inlet
d.- Support heater (only model TLS-603T).
e.- Handles for transport.
f.- The led
g.- Mando selector de potencias.
h.- Adjustable thermostat
FITTING THE BASE (Fig.2)
Fit the base supports to the side and secure each one with four small screws.
