FEATURES
10 Temperature settings for long lasting results
11 Timer settings
3 Rotation Modes; Auto, Left and Right
Fast heating system ready to use in 30 seconds
Suitable for longer hair lengths.
LCD display
Automatic power-off protection
Natural curling result
USER INSTRUCTIONS
We recommend you always start with the lowest temperature setting and increase the
level of heat as required.
Ensure hair is dry and combed through.
Plug the curler into a compatible mains socket.
Slide the switch to your desired rotation mode (A, L or R).
Press the “C” button to set the temperature. The selected temperature will
flash in the LCD display. The curler is ready to use once the preset temperature
has stopped flashing.
Press the “S” button to select a time setting.
Separate a section of hair that is no bigger than 3cm
Please note the curler must be positioned so that the opening of the
Curling chamber is facing upwards
Position the curler where you want the curl to start. The hair section must
be held straight, and placed neatly through the centre of the curler.
Ensure the hair section is put into the Hair Holder.
Press the “()” button, hair will automatically be drawn into the chamber.
Hold the curler until you hear four quick beeps.
Gently pull the curler away from the head, to release the hair and reveal the curl.
To allow the curl to set, do not comb or brush the hair until it cools.
For styling and better results use hairspray.
CAUTION:
If you have placed too much hair through the centre of the curl chamber,
The curler will stop and beep to indicate a problem.
If you pull curler away from head before you hear the beeps, the curl will
straighten out.
Do not place the curl chamber too near the scalp.
Do not place hair curler in water or any other liquid.
Do not wrap the power cord around the hair curler, instead coil the power cord
loosely by the side of the appliance to avoid any damage to the power cord.
Ensure to unplug the appliance after use.
Do not tug at the appliance plug.
Summary of Contents for Ehc Curls Tres Secret
Page 1: ......