Fire Resistance
Your new safe is rated fire resistant for 30 minutes. In the event of fire your safe will get
hot. Your new safe comes with a fire/heat resistant pouch. This pouch has been
designed to further protect polymer banknotes from heat. Whilst the ignition point of
polymer bank notes is higher than that of paper banknotes, they can under certain cir-
cumstances melt and stick together in a fire. Putting polymer banknotes in this pouch
inside your new safe gives added fire and heat protection.
INSTALLING YOUR SAFE
For installation into concrete surfaces use mosonry bolts provided.
1. Install your safe in a location that is secure and sturdy.
2. Drill holes for 12mm masonry bolts in the desired location.
3. Insert the masonry bolts through the holes in the safe and into the concrete.
4. Tighten masonry bolts using a socket or spanner.
For installation into timber surfaces use coach screws (not included).
1. Install your safe in a location that is secure and sturdy.
2. Pre-drill holes in the desired location.
3. Insert the coach screws through the holes in the safe and into the timber.
4. Tighten coach screws using a socket or spanner.
All safes should be bolted down to ensure the best possible security.
OTHER NOTES
* If you wish to clean your safe, use a damp cloth. Do not use liquid or sprayers.
* Never try to dismantle the product by yourself.
* Safe must be installed in an upright position or the warranty shall be void. A safe is
an aid only in reducing theft, it must form only a part of range of security measures
used. Sandleford Holdings will not accept or be held responsible for any loss or
damage caused in the event of theft or unauthorised use.
