manualshive.com logo in svg

SanDisk SSD Ultra ATA, Specification & User Manual

Share
Download
SanDisk SSD Ultra ATA Specification & User Manual Download Page 39

 

SSD (Formerly FFD) Ultra ATA 2.5" 

 

39 

Product Specification and User Manual 

41-PS-0104-00 Rev. 2.3 

10.4.3.2 Using the SSD in an MS-DOS-Based Platform 

After installing the SSD (as described in Section ‎10.4.3), it must be installed as a disk drive 
under DOS. Run the DOS commands listed below and follow the instructions displayed for each 
command. For more information regarding the DOS commands, refer to your DOS manual. 

1.

 

Run the DOS FDISK program to partition the SSD. 

2.

 

Run the DOS FORMAT command to high-level format the SSD. 

3.

 

If you want the SSD to be a bootable drive, run the DOS SYS command and change its 
partition to active. 

10.4.3.3 Using the SSD in a Windows-Based Platform 

The SSD requires no special adjustments or modifications, and can be used just like a magnetic 
hard drive.  

10.4.3.4 Using the SSD in a Linux-Based Platform 

The SSD requires no special adjustments or modifications, and can be used just like a magnetic 
hard drive. 

10.4.3.5 Using the SSD in Other OS/Platforms 

The SSD requires no special adjustments or modifications, and can be used just like a magnetic 
hard drive. 

Summary of Contents for SSD Ultra ATA













































Reviews:

No comments

Brands by name

Popular brands

Load more brands