SSD P4 (PATA) Solid State Drive
Product Manual
Rev 0.4
© 2010 SanDisk® Corporation
9
Document No. 80-11-XXXX1
Once the SSD has been configured by the host, it appears to the host as a standard
ATA (IDE) disk drive.
1.2
Key Features
High capacity, ultra-small form factor supporting unformatted capacities
1
Half 1.8” with a 40-pin LIF connector
of
32GB, 64GB and 128GB:
Interface to host
o
Standard: ATA-8
High performance
2
o
Host transfer rate:
133 MB/s maximum
o
Sustained Read:
100 MB/s
o
Sustained Write:
85 MB/s
o
4K Random Write (Sustained):
130 IOPS
o
4K Random Write (Recovered):
185 IOPS
o
4K Random Read:
1700 IOPS
Low power consumption
o
Supply voltage: 3.3 Vdc
o
Typical read/write
3
o
Standby mode:
72mW
:
0.16W
Highly reliable
o
Mean time to failure (MTTF): TBD hours, based on Part Stress Analysis
o
Operating shock: 1,500G, 0.5msec half sine
o
Operating vibration: 5gRMS, 10-2000 Hz
o
Operating temperature: 0˚C to 70˚C
o
Non-operating temperature and storage: -55˚C to +85˚C
1
The logical capacity of the drive conforms to the IDEMA HDD Specification. See
www.idema.org
for
details. Some of the listed capacity is used for formatting and other functions, and thus is not available for
data storage. 1 megabyte (MB) = 1 million bytes; 1 gigabyte (GB) = 1 billion bytes.
2
These performance numbers refer to the 32GB product. Based on internal testing; performance may
vary.
3
Average (typical) power while running MobileMark™ 2007.
