Chapter 2 – Product Specifications
Revision 3.1
SanDisk iNAND Product Manual
© 2006 SanDisk Corporation
2-1
12/07/06
2 Product
Specifications
2.1 Overview
For details about the environmental, reliability and durability specifications, refer to
Section 8.1
of the SDA
Physical Layer Specification
,
Version 2.00.
2.2
Typical Card Power Requirements
Table 2-1
iNAND Power Requirements (Ta=25°[email protected])
VDD (ripple: max, 60mV peak-to-peak) 2.7 V – 3.6 V
Value Measurement Average
Sleep 250 uA
Max
Read 100 mA
Max
Write 100 mA
Max
2.3 System
Performance
All performance values for iNAND in Table 2-2 were measured using the following
conditions:
•
Voltage range 2.7 V to 3.6 V
•
Temperature -25° C to 85° C
•
Independent of the iNAND clock frequency
Table 2-2
System Performance
Timing Maximum
Value
Block Read Access Time
100 ms
Block Write Access Time
250 ms
CMD1 to Ready after Power-up
1000 ms
2.4
System Reliability and Maintenance
Table 2-3
Reliability and Maintenance Specifications
MTBF
>1,000,000 hours
Preventative Maintenance
None
Data Reliability
<1 non-recoverable error in 10
14
bits read