(18) Sniper 12-Gallon, 500 PSI Carpet Extractor
Sniper 12-Gallon, 500 PSI Carpet Extractor (7)
2.0 Grounding Instructions Continued
This electric equipment is for use on a
normal 120 volt circuit. It has a grounded
plug that looks like the plug illustrated in
(Fig A). The use of a temporary adaptor is
NOT recommended.
NOTE: In Canada, the use of a temporary
adapter is not permitted by the Canadian
Electrical Code.
3.0 Care of your Carpet Extractor
Treat your machine as you would any other high grade, precision made product.
Dropping, unreasonable bumping across thresholds and other misuses may result in a
damaged unit which will not be covered under warranty.
After each use, wipe the extractor body, accessories and power cord with a slightly
damp cloth. When not in use, the remove the power cord and hoses. Stored in a dry
area.
4.0 Set-Up and Operation
DO NOT USE ON WET SURFACES. DO NOT EXPOSE TO RAIN. STORE
INDOORS.
All carpet extractors, no matter what the time of year, are shipped with antifreeze in the
solution lines. Prior to first use, fill the tank with one quart of warm water. Attach the
hose and using the hand tool wand, flush out the system by spraying the one quart of
water through the pump.
• Attach the 1-1/2 inch vacuum hose and the brass quick disconnect.
• Fill the recovery tank with warm water (less than 100 degrees Fahrenheit). Fill to
approximately 4 inches from the top. Pre-spray a liquid detergent made for carpet
cleaning or upholstery on carpet and agitate carpet. Next, use clean water from
solution tank to extract – this procedure is highly recommended. Note: read and mix
your pre-spray solution to the dilution ratios as directed.
• Be sure to replace any filters back into the machine prior to use.
• DO NOT use citrus acid, buterol or harsh degreasers inside the machine.
• DO NOT use powdered detergents in this machine – will VOID warranty.
11.0 Machine Parts List – No Heater Continued
Drawing No. Item ID
Item Description
Qty.
50
10-0835-N
Nut for Pump Bolt on Extractor
8.00
51
10-0808
Caster
2.00
52
10-0816
Caster Bolt 1/4-20 x 1/2 Hex Bolt
12.00
53
10-0843-COM
1/2” x 54” Clear Hose for Extractor Pump
Includes Fittings and Filter
1.00
54
80-0040-C
46” of Blue 3000 PSI Hose for Extractor
Complete with Fittings and Clamps
1.00
55
80-0044-S
30” Black Hose with Fittings and Clamps
1.00
56
10-0835-N
Nut for Pump Bolt on Extractor
4.00
57
Hose Fitting
Part of 80-0044-S
1.00
58
Hose Fitting
Part of 80-0040-C
1.00
59
80-0015
500 PSI Pump Mount Plate
1.00
60
10-0833
Motor Manifold Bolts
4.00
61
80-0044-L
67” Black Hose with Fittings and Clamps
1.00
62
Hose Fitting
Part of 80-0044-L
1.00
63
Hose Fitting
Part of 80-0044-S
1.00
64
10-0881
1/4” MNPT x 3/8” JIC 90 Degree
Part of 80-0044-S
1.00
65
80-0016
500 PSI Pump
1.00
67
10-0400-D
Keeper for Extractor Latch
1.00
68
10-0832
S/R Strap Bolts
4.00
69
10-0040
3000 PSI Blue Hose - Part of 80-0040-C
6.00
70
80-0026
Part of 80-0040-C
1.00
71
80-0017
Bulk Head fitting
3.00
72
10-0379
8-32 x 3/8 Screw
8.00
73
10-0400-C
Latch
1.00
74
10-0868
1/4” Female QD
1.00
75
10-0831
S/R Bracket
2.00
Not Shown 80-0200-B-3100
Extractor Wiring Harness
1.00
