(6) Sniper 12-Gallon, 500 PSI Carpet Extractor
Sniper 12-Gallon, 500 PSI Carpet Extractor (19)
1.0 Safety Instructions Continued
Reduce the Risk of Fire, Electric Shock or Injury
.
• DO NOT leave the carpet extractor when plugged in. Unplug it from the outlet when
not in use and before servicing.
• DO NOT use this carpet extractor with a damaged cord or plug. If the equipment is
not working as it should because it has been dropped, damaged, left outdoors, etc.,
contact an authorized service center.
• DO NOT unplug the carpet extractor by pulling the cord. To unplug, grasp the plug,
not the cord. DO NOT pull the unit by the cord, use the cord as a handle, close a door
on the cord, or pull the cord around sharp edges or corners. Keep the cord away from
heated surfaces. Lift using only the appropriate handles.
• DO NOT overstretch the safety power cord between the equipment and the electrical
outlet in the wall.
• DO NOT tie an extension cord to the pigtail cord. This will damage the cord and will
VOID your warranty.
• DO NOT handle the plug of the vacuum with wet hands.
• DO NOT move the machine up or down stairs with fluid in the machine.
• DO NOT pick up anything that is burning or smoking such as cigarettes, matches or
hot ashes.
• DO NOT use the machine to pick up flammable or combustible liquids such as
gasoline or use in areas where they may be present.
• DO NOT use where oxygen or anesthetics are used.
• DO NOT put objects into openings or use with any openings blocked. Keep free
of dust, lint, hair and anything that may reduce air flow. Keep hair, loose clothing,
fingers, and all body parts away from openings and moving parts to ensure safe
operation.
• DO NOT use if any hoses or nozzles are damaged, cut or punctured.
• DO NOT expose to rain or use on wet surfaces, to avoid electric shock. Store indoors
.
• DO NOT leave machine outdoors, in extreme heat or cold. Harsh weather elements
will damage components and void warranty.
• DO NOT lubricate the motor. If the motor is lubricated, this will VOID your warranty.
2.0 Grounding Instructions
DANGER:
IMPROPER INSTALLATION OF THE GROUNDING PLUG CAN
RESULT IN A RISK OF ELECTRIC SHOCK!
This product must be grounded. In the event of an electrical short circuit, grounding
reduces the risk of electric shock by providing an escape wire with an appropriate
grounding plug. The plug must be plugged into an outlet that is installed properly and
grounded in accordance with all local codes and ordinances.
Check with a qualified electrician or serviceman if the grounding instructions are not
completely understood, or if in doubt as to whether the product is grounded properly.
DO NOT modify the plug provided. If it will not fit into the outlet, have a proper outlet
installed by a qualified electrician.
12.0 Machine Schematic Drawing – Heated Unit
