Sandia 80-2500 Safety, Operation And Maintenance Manual With Parts List Download Page 1

Page: 1 / 12

Safety, Operation and Maintenance

Manual with Parts List

Please read before use!

500 PSI, Dual 2-Stage and 3-Stage MotoRS

Heated and Non-Heated Units

SNIPER 12-G

allon Carpet Extra

ctor

Hea

ted and Non-Hea

ted Units

ACTIVATE

YOUR

WARRANTY!

Important Information and Safety Instructions

Another Innovative

Product from

Manufactured with

Pride in the U.S.A.

Make a copy of this card for future reference.

Ultimate Solutions Corporate Office

15571 Container Lane, Huntington Beach, CA 92649

Phone: 800-983-5834 | Fax: 714-901-8404

www.us-group.com | www.sandiaplastics.com

New Equipment Warranty

Limited Warranty

Sandia Products warrants new equipment against defects in material and
workmanship under normal use and service to the original purchaser. Any statutory
implied warranties, including any warranty of merchantability or fitness for a
particular purpose, are expressly limited to the duration of this written warranty.
Sandia Products will not be liable for any other damages, including but not limited
to indirect or special consequential damages arising out of or in connection with the
furnishing, performance, use or inability to use the machine. This remedy shall be the
exclusive remedy of the purchaser. The warranty period is subject to the conditions
stated below.

Lifetime Warranty on Body, 2-Years on Vacuum Motors, 1-Year on

500 PSI Pump, 90-Days on Tools and Accessories

Sandia Products warrants the roto-molded body to be free from defects in material
and workmanship, under normal use and service for a lifetime. Sandia Products
warrants the motors to be free from defects in material and workmanship, under
normal use and service for two (2) years from the original date of sale and the pump
and the electrical parts for one (1) year. Parts replaced or repaired under this warranty
are warranted for the remainder of the original warranty period. Service labor
charges are covered for one (1) year from the date of purchase, when performed by
a manufacturer-authorized service provider.
Labor is only provided by authorized service centers. If an authorized service
center is not near you, it is the purchaser’s responsibility to take their machine to an
authorized service center.
Normal wear items such as capacitors, cords, finishes or switches will be warranted
for manufacturing defects for ninety (90) days from the purchase date.
All warranties of motors and associated components will be voided: if the machine
is serviced by anyone other than an authorized service provider; if the machine is
mechanically modified; if the machine is operated when not operating properly; or if
the machine is misused or abused.
The warranty starts on the purchase date by the original purchaser from Sandia
Products subject to proof of purchase. The Machine Registration Card must be
completed and returned immediately at the time of purchase. Registration may
also be performed online at: www.sandiaplastics.com/registration.aspx. If proof of
purchase cannot be identified, the warranty start date is ninety (90) days after the
inventory stocking date at the distributor’s warehouse.