1. Strip cable to dimensions shown. Do not nick braid or center conductor.
2. Solder contact to center conductor.
3. Flare braid and slide body assembly over contact and under braid. Then seat body assembly firmly onto contact. The cable may
have to be held in a clamping fixture. Arrange braid uniformly around crimp stem. Slide crimp sleeve forward and crimp using
recommended crimp tool. Slide heat shrink froward and shrink ( as applicable.)
Note:
tools can be purchased from Emerson at
http://emersonconnectivity.com
J3
J2
Static Input Port
Antenna Connector
15
Figure 3-10
STX 165 Rear View
Figure 3-9
Antenna SMA Assembly
Summary of Contents for STX 165
Page 23: ......
