Instructions for the installer, maintenance
technician and final user
Page 19 of 33
© SandenVendo Europe SpA
3.3.2 Placement
Attention!
Make sure that the capacity load of the surface on which the vending machine is positioned is
adequate to support the weight declared by the manufacturer;
Attention!
Before connecting vending machine, make sure that the mains power supply has the correct
voltage, frequency and power as those indicated on the technical data plate of the vending
machine.
Attention!
The appliance must be connected to a power supply network with grounding in compliance
with current legislation. The manufacturer can not be held responsible for any damage
caused by the lack of grounding system.
Connect the service cord to the
socket placed on left side of
the storage area of the vending
machine .
Position the vending machine
in the place of installation,
operate with caution, avoid
maneuvers that can cause
sudden jolts and impacts to the
machine.
The
appliance
must
be
installed in such a way that the
plug is accessible after installation.
For optimal operation, we recommend positioning the vending machine on perfectly flat
surfaces. Any unevenness in the floor can be compensated by adjusting the screw legs of
the distributor in order to obtain perfect leveling and guarantee stability.
If the installation takes place in safety evacuation corridors, make sure that there is still
enough space for passage even with door open of the vending machine.
To ensure smooth operation, always keep the vending machine in perfect clean condition.
i
In the event of extraordinary maintenance or repair / replacement of some
components, the possibility of rotating the appliance must be provided, in order to be
able to access the rear part.
Attention!
SandenVendo Europe declines all responsibility for damages caused to people or things due
to:
•
Incorrect installation.
•
Improper power supply.
