Sandel
Avionics
SN3308 Navigation Display
Installation Manual
90106-IM-G(4) Installation Manual W SIG.doc
Appendix-B Page 2
Conditions
Section/
Paragraph
Description of Conducted Tests
Fungus
13.0
Equipment identified as ‘X’
Salt spray
14.0
Equipment identified as ‘X’
Magnetic effect
15.0
Equipment identified as ‘X’
Power input
16.0
Equipment tested to Category B
Voltage spike conducted
17.0
Equipment tested to Category A
Audio frequency conducted
18.0
Equipment tested to Category B
Induced signal susceptibility
19.0
Equipment tested to Category B
Radio frequency susceptibility
20.0
Equipment tested to Category W
Radio frequency emission
21.0
Equipment tested to Category A/Z
Lightning-induced transient
susceptibility
22.0
Equipment tested to DO-160D,
Waveform sets E/F, Level 2
Lightning direct effects
23.0
Equipment identified as ‘X’
Icing
24.0
Equipment identified as ‘X’
Remarks:
Tests described in Sections 4,5,7, and 8 were conducted by Bell Technologies, Wayne, NJ.
Tests described in Sections 15, 16, 17, 18, 19, 20, 21, and 22 were conducted by Chomerics,
Radiation Test Services, Woburn, MA.
Tests described in Section 6 were conducted by National Technical Systems, Boxborough, MA.
All test reports are on file at Sandel Avionics.
