2
S&C Instruction Sheet 465-500
Introduction
Qualified Persons
WARNING
Only qualified persons who are knowledgeable in the installation, operation, and
maintenance of distribution fusing equipment, along with all associated hazards,
may install, operate, and maintain the equipment covered by this publication . A
qualified person is someone who is trained and competent in:
• The skills and techniques necessary to distinguish exposed live parts from nonlive
parts of electrical equipment
• The skills and techniques necessary to determine the proper approach distances
corresponding to the voltages to which the qualified person will be exposed
• The proper use of special precautionary techniques, personal protective
equipment, insulating and shielding materials, and insulated tools for working on
or near exposed energized parts of electrical equipment
These instructions are intended ONLY for such qualified persons . They are
not intended to be a substitute for adequate training and experience in safety
procedures for this type of equipment .
Read this
Instruction Sheet
NOTICE
Thoroughly and carefully read this instruction sheet before installing or
operating your VacuFuse Self-Resetting Interrupter . Familiarize yourself with
the Safety Information and Safety Precautions on pages 5 through 7 . The latest
version of this publication is available online in PDF format at
sandc.com/en/
support/product-literature/ .
Retain this
Instruction Sheet
This instruction sheet is a permanent part of your VacuFuse Self-Resetting Interrupter.
Designate a location where you can easily retrieve and refer to this publication.
Video
A video of the installation and operation procedures in this instruction sheet is available
at
sandc.com/vacufuse-video
. The goal of the video is to provide a clear and simple
visual reference. In no way is the video meant as a complete replacement of these written
instructions.
