S&C Instruction Sheet 1072-570
29
Testing Alternate Routing
STEP 5.
Unplug radio power to Radio #40 .
Follow these steps to test alternate routing:
STEP 1.
Install one 30dB attenuator between the antenna and the antenna connector of
Radio 20 . See Figure 35 for the network diagram .
STEP 2.
Ping Radio #30 .
STEP 3.
Tracert to Radio #30 .
STEP 4.
Observe the route from Radio #10 to Radio #30 is through Radio #40 . See
Figure 35 . C:\ping 192 .168 .202 .30 - t . C:\>tracert 192 .168 .202 .30 .
Trace the route to 192 .168 .202 .30 over a maximum of 30 hops .
1
* * * Request
timed
out
2 . 11 ms 18 ms 18 ms 192 .168 .202 .40
3 . 24 ms 24 ms 29 ms 192 .168 .202 .30
Figure 35. Testing for alternate routing.
90 dB Attenuation
192 .168 .202 .10
192 .168 .10 .50
90 dB Attenuation
192 .168 .202 .40
192 .168 .202 .30
30 dB Attenuation
192 .168 .202 .20
192 .168 .10 .1
