S&C Instruction Sheet 1072-570
15
Building a Two-Node Network
Figure 12. Main screen for SpeedNet configuration.
Figure 13. Ethernet configuration dialog box.
At this point, you have logged into Radio #20 through Radio #10 using Radio #20’s
factory-default Ethernet IP address of 192 .168 .200 .1 . Radio #10 is functioning as a router to
accomplish this . Radio #10 is the PC’s default gateway and is routing your client login traffic
to/from Radio #20 . No change to the PC’s settings was required because the radio to which
it was directly connected had no configuration changes to its Ethernet port IP settings . It
is important to change the PC address, mask, and default gateway when changes are made
to the attached radio’s Ethernet port IP settings .
STEP 8.
The
Main
screen will open, as shown in Figure 12 . Click the
Interfaces
tab .
STEP 9.
The
Interfaces
screen will open . Click the
Ethernet
tab . See Figure 13 .
STEP 10.
Change the IP Address to:
192.168.20.1
, and click on the
Apply
button .
