2 S&C Instruction Sheet 1074-510
Introduction
Qualified
Persons
WARNING
Only qualified persons who are knowledgeable in the installation, operation, and maintenance
of overhead and underground electric distribution equipment, along with all associated hazards,
may install, operate, and maintain the equipment covered by this publication. A qualified person
is someone who is trained and competent in:
• The skills and techniques necessary to distinguish exposed live parts from nonlive parts of
electrical equipment
• The skills and techniques necessary to determine the proper approach distances corresponding
to the voltages to which the qualified person will be exposed
• The proper use of special precautionary techniques, personal protective equipment, insulated
and shielding materials, and insulated tools for working on or near exposed energized parts
of electrical equipment
These instructions are intended ONLY for such qualified persons. They are not intended to be a
substitute for adequate training and experience in safety procedures for this type of equipment.
Read this
Instruction
Sheet
NOTICE
Thoroughly and carefully read this instruction sheet and all materials included in the product’s
instruction handbook before installing or operating the SpeedNet ME Mesh End-Point Radio.
Familiarize yourself with the Safety Information on page 3. The latest version of this publication
is available online in PDF format at
sandc.com/en/support/product-literature/.
Retain this
Instruction
Sheet
This instruction sheet should be available for reference wherever a SpeedNet ME radio is to be used.
Retain this instruction sheet in a location where you can easily retrieve and refer to it.
Proper
Application
WARNING
The equipment in this publication is only intended for a specific application. The application
must be within the ratings furnished for the equipment. Ratings for the SpeedNet ME radio are
listed in the ratings table in Specification Bulletin 1074-31.
Warranty
The standard warranty contained in S&C’s standard conditions of sale, as set forth in Price Sheet
150, applies to SpeedNet ME radios.
Warranty of the SpeedNet ME radio is contingent upon the installation, configuration, and use
of the SpeedNet ME radio and software in accordance with S&C’s applicable instruction sheets.
This warranty does not apply to major components not of S&C manufacture, such as batteries, and
other communication devices. However, S&C will assign to immediate purchaser or end user all
manufacturers’ warranties that apply to such major components.
