S&C Instruction Sheet 811-510
7
Disassembling the Loadbuster Loadbreak Tool
Step 3
NOTICE
Use a hand-driven screwdriver to loosen the four screws .
A power-driven screwdriver may damage the trigger
assembly .
Remove the four screws that fasten the trigger assembly to
the inner tube assembly, and withdraw the trigger assembly.
Discard the screws. See Figure 5.
Screws (4)
Trigger
assembly
Figure 5. Remove the four screws securing the trigger assem-
bly to the inner tube assembly. Remove the trigger assembly.
Step 4
Withdraw the moving contact assembly, and then slide off
the guide bearing. See Figure 6.
Guide bearing
Moving contact assembly
Figure 6. Remove the moving contact assembly and slide off
the guide bearing.
Step 5
Carefully withdraw the inner tube assembly from the
chassis. See Figure 7.
Inner tube assembly
Figure 7. Remove the inner tube assembly.
