18
S&C Instruction Sheet 811-510
Assembling the Loadbuster Loadbreak Tool
Step 31
Install the anchor assembly so the key on the anchor
assembly mates with a slot in the ferrule of the inner tube
assembly. See Figure 36.
Anchor assembly
Key
Slot
Figure 36. Install the anchor assembly so the key mates with
the slot on the inner tube assembly.
Step 32
Reinstall the retaining ring. Position the retaining ring so
the concave shape is toward the anchor assembly. Use a
hammer or mallet to secure the ring in place around the
inner tube assembly and the anchor assembly. See Figure 37.
Retaining ring
Figure 37. Reinstall the retaining ring. Make sure the ring is
bowed toward the surface of the anchor assembly. Tap it into
place with a mallet.
Step 33
Reinstall the silencer on the inner tube assembly. If
the silencer has metal threads, apply a light coating of
petroleum jelly to the threads. See Figure 38.
Silencer
Figure 38. Reinstall the silencer.
