background image

 

 S&C Instruction Sheet 1022-540    23

Saving and Loading a Setup Configuration

When several IntelliCap controls use a similar setup configuration, the configuration from 
one control can be saved and loaded into other controls. Only the setpoints that are different 
for each control need to be configured.

Follow these steps to save a configuration:

STEP 1. 

Connect a PC to the control and start the IntelliLink software.

STEP 2. 

Click on the 

Setup

 button. Then, click on the 

Save Data

 button.

STEP 3. 

In the dialog box, choose a file name and location for saving this configuration. The 
extension “.cfg” is assumed. Then, click on the 

Save

 button.

Note:

 This process does not save the 

Physical Location

 field on the 

Setup: General

 screen.

Follow these steps to load a saved configuration into a control:

STEP 1. 

Connect a PC to the control and start the IntelliLink software.

STEP 2. 

Click on the 

Tools

 menu. Then, click on the 

Load Setpoints

 entry.

STEP 3. 

In the dialog box, choose the file for the configuration being loaded. Click on the 

Open

 button.

STEP 4. 

Enter the full path name and file name. Then, press the 

<Enter>

 key.

STEP 5. 

Make any necessary setpoint configuration changes.

STEP 6. 

Enter the correct value in the 

Physical Location

 field on the 

Setup: General 

screen.

Summary of Contents for IntelliCap



























Reviews: