5
ENGLISH
3 Use
3.1 Charging
Charge the camera using the USB cable supplied.
Connect the cable between the camera's
MicroUSB jack and a USB port on a computer
or wall charger.
Refer to section 6 if you are connecting to a
computer.
The camera can also be charged from a 12V port
in a car using the car charger supplied.
3.2 Memory card
The camera records directly to Micro SD cards
(not included in the accessories pack). Insert a
Micro SD card into the Micro SD port on the
camera. Turn the card as shown in the following
illustration.
Push the whole card in, until you hear a clicking
sound.
Press the card again to remove it.
4 Using the camera
1. Turn the camera on and off by holding the
'Mode' button down for about two seconds.
2. You can switch between camera modes using
the 'Mode' button. The following modes are
available to choose from:
Video recording:
Press the 'OK' button to start and
stop a recording. A red flashing icon
appears on the screen while you are
recording and disappears when you
stop it.
Single photo:
Press the 'OK' button to capture a
single photo.
Slow motion video recording:
Press the 'OK' button to start and
stop a slow motion recording. A red
flashing icon appears while you are
recording and disappears when you
stop it.
Video and photo playback:
1. Use the 'Up/Down' buttons on the
side of the camera to select the
file you require.
2. Press the 'OK' button to play back
a video. Press the 'OK' button
again to pause the playback.
Settings:
The camera has several different
setup options available, for which
settings can be made using the self-
explanatory menus described below.
- Press the 'Mode' button to switch
between the individual menus.
- Use the 'Up/Down' buttons on the
side of the camera to move up and
down through a menu.
- Press the 'OK' button to make a
selection.
