4
If you have installed Service Pack 2 of
Windows XP, the following installation steps
are necessary:
1. Click
“Start”
,
“Control Panel”
,
“Performance and Maintenance”
,
“System”
.
2. Select the
“Hardware”
tab and click
the
“Device Manager”
button.
3. Double-click
“Bluetooth Radios”
, then
“USB Bluetooth Wireless Adapter”
.
4. Select the
“Driver”
tab and click the
“Update Driver...”
button.
5. Select
“Install from a list… (Advanced)”
.
Click
“Next”
.
6. Select
“Do not search. I will select the
driver to be installed”
. Click
“Next”
.
7. Select
“USB Bluetooth Device”
. Click
“Next”
.
8. Windows will now install the drivers.
Click
“Finish”
.
9. Close all windows to return to the
desktop.
The adapter is now installed and ready for
use.
Introduction to Bluetooth
®
After the adapter is installed, you can
establish a link to other Bluetooth
®
-
compatible devices. Establishing
communication between the Sandberg USB
to Bluetooth
®
Class1 Link and a Bluetooth
®
adapter from another manufacturer depends
on the individual model.
There are several ways of establishing
communication between the devices. These
are described below.
Services
Devices with Bluetooth
®
installed will offer
to share their resources with other
Bluetooth
®
devices. These can be used by
double-clicking on the service via the
Bluetooth
®
icon on the Desktop. For
example, a computer with a modem
installed will offer the “Dialup Networking”
service. If it also had a program installed for
sending fax messages, the
“Fax”
service
would also appear. The service must be
enabled by the computer that has the
modem installed. This is done by right-
clicking on the Bluetooth
®
icon on the
desktop, selecting
“Bluetooth Setup
Wizard”
, then
“I want to configure….”
and selecting which functions/services the
computer should offer to other devices.
ENGLISH
