S&B Filters 75-5115, Installation Instructions Manual

Page: 9 / 13

SBFILTERS.COM
14
Determine if you want to install the Box Plug (F) onto the Airbox
(A) or leave it open. See the “Air Box Plug” note on Page 2 for
more information. If the Box Plug (F) is desired, simply press the
Box Plug (F) into the box opening until it snaps into place.
15
Place the Airbox (A) in the engine bay. Make sure you line up
the fender seal with the fender opening, the three mounting
grommets are lined up with the mounting points, and the two
pegs in the back of the Airbox have lined up through the two
clearance holes in the box. Secure the airbox using the three M8
bolts (S) and three M8 Washers (T) we have provided.
Tool Required:
12mm Socket/Wrench
16
Place the Air Filter (C) in the Airbox (A) .
17
Remove the MAF sensor from the stock airbox.
Tool Required:
Phillips Screwdriver
18
Install the MAF sensor onto the Intake Tube (B) using the
provided Gasket (M) , Plate (N) and Screws (O) .
Tool Required:
Phillips Screwdriver
19
Install the Barbed Hose Fitting (P) onto the Intake Tube (B) .
Hand tighten first, then use a wrench to secure.
Tool Required:
11mm Socket/Wrench
8