S&A CW-5300 User Manual Download Page 4

TY-JS-20319-003

4

Notice

In order to ensure your personal safety and avoid property loss, you must pay attention to

this manual, but not limited to the following warning notices. General electric knowledge

and safety standards should also be followed.

DANGER

Failure to take safety measures will result in death or serious

personal injury.

Notice

Operation Guideline

The Operation should be

carried out by professional

technicians

Handling, installation of pipes, electrical, operation,
maintenance, overhaul and other operations must be
carried out by personnel with professional knowledge.

It is forbidden to be used

beyond the range of

specification

It is forbidden to use the equipment beyond the range of
manual specifications in order to avoid equipment
damage, injury, fire, electric shock and other major
accidents.

It is forbidden to be used in

the explosive environment

It cannot be installed in dangerous places with
flammable gas.

Electrical connection

a) The power supply must conform to the standard
indicated in the nameplate or the manual;
b) Use the standard cable, and select the standard wire
diameter;
c) The grounding wire must be installed and the
connection must be reliable; otherwise, it will cause an
electric shock or fire.

It is forbidden to operate the

equipment without a cover

There are live parts inside the machine. It is forbidden to
operate without a cover, as there is a risk of electric
shock.

Water-proof

Do not allow the equipment to be drenched or immersed
in water, otherwise there may be a risk of short circuit
and electric shock.

Maintenance and repair

The operation must be carried out after 3 minutes of
cutting off the power supply, because the high-voltage
charging part in the equipment is not discharged within 3
minutes. Working in a live state or working immediately
after shutdown will cause the risk of electric shock.

Danger

High Voltage

Contact with live parts can cause serious personal injury
or death.

Danger

Hot Surface

The human body or the heat-labile articles must keep
away from this high temperature area. Otherwise, it will
cause personal injury or property loss.

Summary of Contents for CW-5300




















Reviews: