Page 30/67
In the video scene of this channel, you need to define which area will be processed if motion detection occurs. The
whole image is divided into 48 (6×8) panes. Three colors are available for cursor to set motion detection: yellow
indicates moving cursor only; blue indicates setting motion detection area and the panes that blue cursor moves across
will turn into red, indicating that these areas are selected; green indicates deleting motion detection area and the panes
that green cursor moves across will turn into grey, indicating that these areas are not selected. Press [Menu] key o switch
the color of cursor among yellow, blue and green. Press [
↑
]
, [
↓
]
, [
←
]
,
and
[
→
] to move cursor and select area. If the
color changes at selected areas, motion detection will be triggered. If the color changes at areas that are not selected,
motion detection won’t be triggered. As shown in the figure below: motion detection will be triggered in area A (red)
instead of area B (grey). After selection, press “0” to exit.
