Sanan SA-2204 Manual Download Page 12

Page: 12 / 67

Page 12/67

Above picture is rear panel picture. Different model will be with different rear panel.

1 Audio output (optional)

Connect to (analog) audio output device.

2. Audio input (optional)

Connect to (analog) Audio input device.

3. Video input

Connect to video input device; Output video signal by two BNC connectors.

4. Video output

Connect to monitor and output video signals.

5. VGA output

Connect to VGA display

6. UTP network port

Connect to Ethernet devices, e.g. Ethernet switch, Ethernet hub, etc.

7. Power supply

Connect to DC12V/3A power adaptor

8. Alarm output

Send alarm signals; connect to alarm buzzer or lamp

9. Alarm input

Receive alarm signals; connect to alarm sensor, such as wave sensor, door status switch and shock sensor.

10. RS485 interface

Connect to pan/tilt equipment

11. Fan

It is used to keep ventilation in side the case. It cannot be blocked by any articles.

Summary of Contents for SA-2204




































































Search results

Summary of Contents for SA-2204

Reviews:

Related manuals for SA-2204

Brands by name

Popular brands

Sanan SA-2204, Manual

Search results

Summary of Contents for SA-2204

Reviews:

Related manuals for SA-2204

Brands by name

Popular brands