San Telequip Private Limited.,
504 & 505 Deron Heights, Baner Road
Pune 411045, India
Phone
: +91-20-27273455, 9764027070, 8390069393 Connecting. Converting. Leading!
If any chance you forgot the login password, or have incorrect settings making Converter inoperable.
When
the power is on and the “SYS” LED light on, use a point tip to press this button and hold it and wait
for more than 25 seconds. All the parameters will be reset to the factory default.
LED Indicators
PWR (Red)
:
After power on, this LED is always On.
SYS (Green) :
After power on and system working, this LED start blinking
Wi-Fi (Red)
:
LED is ON after power on, then off a while. It starts blinking after Wi-Fi module is ON
TX
TX/ RX
(Green/Green)
:
Upon data sending or receiving indicator, the LED will blink.
Wiring Architecture
RS232 Wiring
RS-422 Wiring
RS485 Wiring
When you finish the steps mentioned above and the LED indicators are as shown, the Converter is
installed correctly. You can check the Software Setup in CD or Our Web site
