5.20 AGPS Update
The users can use this command to update AGPS data. Below is the command format.
Setup format:
#username,0000,au,0 or 1,update time*
Example:
#username,0000,au,1,10*
The table 5.20.1 describes the meaning of each segment in the message above.
Table 5.20.1
The table 5.20.2 is showing each confirmation message reply after setup.
Table 5.20.2
Text Keyed In SMS Description
#
Start sign.
username
Default ID of CT-58A.
If you have changed the Username, please use the updated one.
0000
Default password.
If you have changed the password, please use the updated one.
au
The function code; it means “AGPS Update”
0 or 1
Switch on or off AGPS Update
10
The will update AGPS data every 10 hours
*
End sign.
Situation
Message Reply
Setup Succeeds
[username] + AU setup OK.
Setup Fail
[username] + IP/Domain setup Fail!
Incorrect password
[username] + Password setup Fail!
Incorrect username or command
format
[username] + command error
CT-58A is in Emergency Mode
[username] + in emergency, AU setup is not allowed.