san ignacio 43817, Manual

Page: 8 / 24

5. Place the item to be weighed on the scale (or in the bowl if required). The LCD will
show the weight value.
6. After weighing, press the button on/off for three seconds to turn off the scale (or leave
the scale and it will automatically power off in 2 minutes).
UNIT CONVERSION
You can configure the unit sys-
tem of the scale: Metric (g, ml)
and Imperial (lb:oz, fl’oz).
While the scale is on, select
the required unit by pressing
the “unit” button for 3 seconds
until the desired unit is shown,
g/lb:oz or ml/fl’oz.
TARE FUNCTION
The tare function allows you to weigh another item
consecutively after weighing the first item without
removing it from the scale.
- Turn on the scale and wait until “0” is shown on the
display. Put the container on the scale platform. The
LCD display will show the steady weight of the contain-
er.
- Touch the on/off button to clear the weight of the con-
tainer (and reset to zero).
- The lower-left corner will show a “T” icon, that
means the Tare function is activated.
- Add the ingredients into the container.
- The LCD will show the weight of the ingredients
only.
- Touch the tare button to weight new different in-
gredients.
NEGATIVE VALUE
The display will show a negative value (see LCD functions) if a weight has been removed
from the scale. Please press the on/off button to clear the negative value, the display will
show “0” again.