![background image](http://html1.mh-extra.com/html/san-ignacio/37686/37686_instruction-manual_3805034006.webp)
2. HOW TO USE
-
Make sure the appliance is unplugged and switched off.
-
Measure popping corn using the corn measure, one full measure per popping session is enough.
More than one full measure could overfill the appliance and disturb the right functioning of the
appliance.
-
Never add butter,oil or sugar to the corn in the aluminium heat chamber. Only use corn especially
made for popping. Pour corn through the hopper inlet to fill the chamber aluminium heat.
-
Put the measuring cup on top of the chute. Place a large bowl under the spout so that the edge of
the bowl is touching the body of the machine .It is important that the popcorn being ejected down
the chute into the bowl is not re-directed, blocked or otherwise interfered with, since the popcorn
is hot and premature contact may cause minor discomfort.
-
Turn the unit in position "I". After a while the machine will automatically begin to supply corn to the
heat chamber, until exhausted. This process will take about 3 minutes. Turn off the device when the
sound of corn cease making.
-
You can add the flavouring up to your taste. Just like the butter, salt or sugar.
WARNING:
THIS IS NOT A TOY! PLEASE DO NOT LEAVE CHILDREN UNSUPERVISED with the appliance during
operation, when it is hot or connected to electricity.
Notice
:
•
Check that the mains voltage corresponds to that indicated on the appliance. Voltage:
AC220V-240V.
•
Do not add butter, sugar or salt in the appliance.
•
Make sure the measuring cup and lid are placed on top of the hopper.
•
If you want to pop a lot, first remove popcorn remaining in the heat chamber. Take care not to burn
yourself when handling the hopper as this part and the measuring cup may be hot if the machine is
working. Therefore we recommend that you wait 10 to 20 minutes before preparing a second
portion.
3. MAINTENANCE& CLEANING
-
Before cleaning the appliance, remove the plug from the outlet.
-
To avoid the risk of electric shock, do not clean the base unit or the power cord with water, and do
not immerse them in water.
-
Do not use abrasives, harsh cleaning solutions or hard brushes for cleaning.
-
Make sure the appliance has totally cooled down before cleaning.
-
Make sure the appliance has cooled completely before cleaning.
-
Clean the plastic parts of the base unit with a damp cloth. Never use abrasives, as they may damage
the unit.
-
The hopper and the measuring cup can be cleaned with soapy water.