11
3.3.2. MENU Functions
To use the functions attached with
‘
※
’,
it is required to get connected with
external navigational
device
.
FUNC/DISPLAY
SET
※
BEARING : To select the display of PPI image
bearing.
※
EBL/CSR READ OUT : To decide whether the
bearing and the cursor are to be displayed
‘Relative’ or ‘True’.
※
Megnetic Correction : To adjust the magnetic
correction value.
DISTANCE UNIT : To select the unit of the
distance measured by VRM or Cursor.
NM : Nautical Mile
KM : Kilometer caculated from NM
KM-River: Display a distance unit for River
WAKES : To indicate the track of the moving
target according to the time intervals.
Short : 5 Circles, Long : 10 Circles
※
WAYPONT : To display the position of the
target on the screen.
※
HEADING MODE : To select the display of the
own ship heading.
RADAR SET-UP
TIMED TX : To decide the automatic repetition
of the TX status and the stand-by for
saving the power.
TX PERIOD : To set up the TX intervals by the
number of the rotations
STAND-BY TIME : To set up the time of the
stand-by status
ALARM LEVEL : To indicate the level of the
image to make an alarm.
Even if the level becomes lower, it is designed
rings by the weak image signal and reacts
sensitively.
TX PULSE : To set up the TX pulse width.
Short : The resolution is good.
Long : The gain is good.
TARGET MAG. : To expand the image size
freely on the screen
.
TUNING MODE : To select ‘Automatic’ or
‘Manual’.
